Pengo Computer Accessories uBR7200 User Manual download pdf (Page 97)

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio threshold

Cisco IOS Release 12.1(5)XM

Defaults No default behavior or values.

Command Modes Interface configuration

Command History

Usage Guidelines The following describes how clear-time and repeat-time work for the three scenarios:

1. If clear-time is any value and repeat-time is 0, the user is notified whenever one of the following

threshold conditions are met: {high-thresh | low-thresh | up-change | down-change |

pos-crossing | neg-crossing}.

2. If clear-time is greater than 0 and repeat-time is 0, the following occurs:

a. When a threshold condition is met for the first time, the user is notified.

b. When a threshold condition does not occur for the length of clear-time, the user is notified and

the cycle continues with Step 2a.

3. If both clear-time and repeat-time are greater than 0, the following occurs:

a. When one of the threshold conditions occurs for the first time, the user is notified. After the

first notification, no more notifications are sent for the length of repeat-time. At the end of

repeat-time, the user is notified indicating how many times the user was not notified when the

threshold condition occurred.

b. When a threshold condition stops being met for the length of clear-time period, the user is

notified then the cycle starts with Step 3a.

Examples The following example configures threshold specification for sinr-ant1 on channel 0:

Router(config-if)# radio threshold sinr-ant1 0 high 30

Related Commands

clear-time Identifies how long the signal stays below a threshold before another event

is generated.

dsp Specifies one of the following digital signal process (DSP) numbers

(dspNum): dsprx0, dsprx1, dsprx2, or dsprx3.

Release Modification

12.1(3)XQ1 This command was introduced.

Command Description

show interface radio

thresholds

Displays the set of currently configured thresholds on the radio card.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 179 180

No comments

Pengo Computer Accessories uBR7200 User Manual Page 97